It is Packaging that sells Products.
  Size Table for Aluminum Collapsible Tubes
 
 

Aluminum tubes have a highest barrier properties in comparison with other types of tubes. Different diameters, great choice of caps, possibility to make tube with membrane or long nozzle, latex ring and painted shoulders all these facts allow to satisfy all the wishes of customers.

Size Table for Aluminum Tubes
Diameter

L1
Length*
(Double Fold)
min-max
mm

Recommended
fill volume
(ml)
Thread Diameter (mm)
M7 M8
M9
M11
M12
M15
Maximum Opening from M6
(With / Without membrance)
mm
mm
ml
2.0
3.5
5.5
7.0
7.5
10
12.5 / 13.5
75-96
5-7
16
70-110
5-12
19
85-125
10-20
22
100-130
20-30
25
100-150
30-50
30
110-170
50-110
32
120-180
110-130
35
120-180
130-150
40
140-200
150-200
* Add 5mm for triple fold
* Add 8mm for saddle fold
* Add 3mm for single fold turned back
 
Printing Specification of Aluminum Collapsible Tubes

Calculate the printing area by multiplying the printable zone (nominal the diameter multiplied 3.142) with the nominal height of the tube. The nominal height of the tube is the open tube, including also the non printable zone at the end of the tube for the folding and the mark for the photographic cell.The standard technology for printing is off-set "wet on wet" with matrixes of photopolymers. Four Colours are available on white lacquered background. The ideal grid should be composed of (133 L.P.I).
The shadings must be continuous (maximum intensity 85%, minimum intensity 4%). Overlapping of more than two colours must be avoided. The graphic department of United Tubes is based on Machintosh and is prepared to cooperate with the customer's art director in order to obtain the best quality result.

 

 
 
© 2020 United Tubes (Pvt) Limited. - All rights reserved.                             Developed for United Tubes (Pvt) Limited