It is Packaging that sells Products.
  Size Table for Plastic Laminate Tubes
 
 
Dimensions-Outer diameter (mm) Length (mm) Recommended filling capacity (gms) Approx
13 60 - 80 5 - 7
16 80 - 100 8 - 10
19 80 - 100 10 - 12
19 110 10 - 15
22 110 25 - 30
22 126 30 - 50
25 100 - 150 50 - 70
28 124 - 160 70 - 100
30 140 - 186 100 - 150
35 150 - 170 130 - 160
Printing Specification for Laminate Tubes
Calculate the printing area by multiplying the printable zone (nominal the diameter multiplied 3.142) with the nominal height of the tube. The length of tube depends on customer requirement including the non printable area closed to the shoulder as well as the free area for welding and the mark for the photographic cell.

The standard technology used on bright background is dry off-set with matrixes of photopolymer. Eight colours with wet off-set are available. The ideal grid should be composed of (150 L.P.I.). The shadings must be continuous (maximum intensity 85% minimum intensity 4%). The graphic department of United Tubes works on base of Macintosh and is prepared to cooperate with the customer's in order to obtain the best quality result. Overlapping of more than two colours must be avoided.
 

 

 
 
© 2020 United Tubes (Pvt) Limited. - All rights reserved.                             Developed for United Tubes (Pvt) Limited